Posts for tag: orthodontic treatment
Dentists extract millions of teeth each year, mostly because of disease. But sometimes a healthy tooth is removed to gain a more favorable, long-term dental health outcome.
An example of this is extracting teeth for the sake of orthodontic treatment. This is often beneficial when treating bite problems caused by crowding, a condition in which not enough space on the jaw exists to accommodate all of the teeth coming in. When this happens, the limited space can force teeth out of their proper alignment.
Crowding also complicates correcting the bite problem with braces: As with the eruption phase, there's no available room for orthodontic movement. One solution that may arise after a detailed examination is to open up space on the jaw by removing some of the teeth.
Planning this kind of tooth extrication requires careful forethought with the end in mind—ultimately, the dental providers involved want the resulting appearance after braces to look as natural as possible. For that reason, dentists usually choose teeth for extraction that are outside of the "smile zone" (the teeth visible while smiling) like premolars and molars.
Additionally, dentists are concerned about bone loss after extracting the teeth. Bone often diminishes around empty tooth sockets, especially if those sockets were damaged during extraction. This loss in bone can weaken the jaw structure and cause significant problems while moving teeth with braces.
To avoid this, dentists take great care during tooth removal not to damage the socket. Additionally, they may place a bone graft within the socket immediately after removing the tooth, especially if the space will remain vacant for a significant period of time. A bone graft serves as a scaffold upon which new bone cells can form and accumulate.
After the extractions, the orthodontist may then proceed with correcting the bite. Patients may also need some form of prosthetic teeth to fill in the spaces while wearing braces. Often prosthetic teeth can be incorporated with the braces for a more natural look. After braces, any remaining gaps may require further restoration, either with dentures, bridges or, later in adulthood, dental implants.
Complex bite problems like crowding pose unique challenges in correcting them. But using techniques like tooth extraction can help achieve a successful and satisfactory outcome.
If you would like more information on treatments for bite problems, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Tooth Removal for Orthodontic Reasons.”
The big day finally arrives when your braces come off. And there it is—your new, beautiful, straight smile! But on closer inspection you notice something else: tiny white spots on your teeth.
Those pale, chalky spots are called white spot lesions (WSLs). They occur when acid has contacted the tooth enamel for too long, dissolving essential minerals like calcium in those particular areas. The occurrences of WSLs during and after braces highlights a major challenge during orthodontic treatment—keeping your teeth clean.
Braces' wires and brackets tend to get in the way of brushing and flossing, making it easier to miss plaque—the bacterial film that produces acid—on tooth areas around the hardware. Those missed areas could in time lead to WSLs.
The main objective with WSLs is prevent them from occurring during braces wear as much as possible. To do this, you'll need to increase your time and effort brushing and flossing, especially around orthodontic hardware. You can make it easier, though, by using a few tools that often work better than regular toothbrushes and floss like interproximal toothbrushes, power brushes, floss threaders or water flossers.
You can also help lower your mouth's acidity by avoiding or limiting acidic foods and beverages, including juices, sodas, sports and energy drinks. And, by all means, keep up your regular dental cleaning schedule with your general dentist.
Should WSLs develop while you're wearing braces, don't panic. It's possible they'll diminish on their own, or at least not worsen. We can also foster re-mineralization of the enamel with applied fluoride, short bursts of laser light or a procedure called microabrasion that restores damaged areas below the enamel surface.
For more resistant WSLs, we can also inject a liquid tooth-colored resin into them that when hardened by a curing light can make those areas look translucent like normal enamel. We can also use other cosmetic solutions like bonding or veneers to improve your teeth's appearance.
Like other dental problems, dealing with a WSL is usually more successful if caught and treated early. So, check your teeth often while wearing braces, and if you notice anything unusual don't hesitate to call your dentist.
If you would like more information on oral care while wearing braces, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “White Spots on Teeth During Orthodontic Treatment.”
“Orthodontic treatment” and “braces” almost seem like synonymous terms. But while braces certainly are orthodontic, it isn't the only tool in an orthodontist's toolkit.
A good example is a device is known as a Herbst appliance. It's used in situations where the upper jaw is outpacing the growth and development of the lower jaw during childhood. If not corrected, this could cause the top teeth to protrude abnormally beyond the lower teeth.
The Herbst appliance gently and gradually coaxes the lower jaw to grow in a more forward direction, thus “catching up” with the upper jaw. The top part of the device consists of two metal tubes hinged to small elastic bands, which are cemented to the cheek side of the upper back teeth (molars), one on either side of the jaw.
Two smaller tubes are attached in like fashion to the lower teeth, and then inserted into the larger tubes. As the lower jaw moves, the smaller tubes move within the larger to create pressure that gently pushes the jaw forward. Over time, this can sync the growth progress of both the upper and lower jaws, and reduce the chances of a poor bite.
For best results, a Herbst appliance is usually placed to coincide with a child's most rapid period of jaw growth, usually between 11 and 14. They could be placed as early as 8 or 9, however, in situations where the front teeth are already protruding well beyond the lips. In any event, the goal is to positively influence the growth of the lower jaw to alleviate or at least minimize the need for future orthodontic treatment.
As a fixed device, there's no need for a child or parent to tend to it as with other methods, like orthodontic headwear worn in conjunction with braces. A Herbst appliance can, however, alter the normal sensations associated with eating, swallowing and speaking, which may take a little adjustment time for the child. Wearers will also need to be extra vigilant with daily brushing and flossing because of a higher risk of tooth decay.
These, though, are minor inconveniences compared with the benefit of improved bite development. As such, a Herbst appliance could be a positive investment in your child's dental future.
If you would like more information on interceptive orthodontics, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “The Herbst Appliance.”
Orthodontics shares a principle with the classic tug of war game: if you want things to move in the right direction you need a good anchor. Anchors help braces and other appliances apply constant pressure to misaligned teeth in the direction they need to go to correct a malocclusion (poor bite).
Orthodontic treatments work in cooperation with an existing oral mechanism that already moves teeth naturally in response to biting forces or other environmental factors. The key to this mechanism is an elastic tissue known as the periodontal ligament that lies between the tooth and the bone. Besides holding teeth in place through tiny attached fibers, the ligament also allows the teeth to move in tiny increments.
Braces’ wires laced through brackets affixed to the teeth exert pressure on them in the desired direction of movement –the periodontal ligament and other structures do the rest. To maintain that pressure we need to attach them to an “anchor”—in basic malocclusions that’s usually the back molar teeth.
But not all malocclusions are that simple. Some may require moving only certain teeth while not moving their neighbors. Younger patients’ jaws and facial structures still under development may also need to be considered during orthodontic treatment. That’s why orthodontists have other anchorage methods to address these possible complications.
One example of an alternate anchorage is a headgear appliance that actually uses the patient’s skull as the anchor. The headgear consists of a strap running around the back of the head and attached in front to orthodontic brackets (usually on molar teeth). The pressure it exerts can trigger tooth movement, but it can also help influence jaw development if an upper or lower jaw is growing too far forward or back.
Another useful anchorage method is a tiny metal screw called a temporary anchorage device (TAD) that is implanted into the jawbone above the teeth through the gums. Orthodontists then attach elastic bands between implanted TADs and specific braces’ brackets or wires to exert pressure on certain teeth but not others with pinpoint accuracy. After treatment the TADs can be easily removed.
Using these and other appliances allows orthodontists to customize treatment to an individual patient’s particular malocclusion. With the right anchor, even the most complex bite problem can be transformed into a beautiful and healthy smile.
If you would like more information on orthodontic treatment, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Orthodontic Headgear & Other Anchorage Appliances.”
What do a teenager with a poor bite, a senior citizen with multiple missing teeth or a middle-aged person with a teeth grinding habit all have in common? They may all depend on a dental appliance for better function or appearance.
There’s a wide variety of removable dental appliances like clear aligners or retainers for orthodontic treatment, dentures for tooth loss or night guards to minimize teeth grinding, just to name a few. But while different, they all share a common need: regular cleaning and maintenance to prevent them from triggering dental disease and to keep them functioning properly.
The first thing to remember about appliance cleaning is that it’s not the same as regular oral hygiene, especially if you have dentures. While they look like real teeth, they’re not. Toothpaste is a no-no because the abrasives in toothpaste designed for tooth enamel can scratch appliance surfaces. These microscopic scratches can develop havens for disease-causing bacteria.
Instead, use liquid dish detergent, hand soap or a specific cleaner for your appliance with a different brush from your regular toothbrush or a specialized tool for your particular appliance. Use warm but not very hot or boiling water: while heat indeed kills bacteria, the hot temperatures can warp the plastic in the appliance and distort its fit. You should also avoid bleach—while also a bacteria killer, it can fade out the gum color of appliance bases.
Be sure you exercise caution while cleaning your appliance. For example, place a towel in the sink basin so if the appliance slips from your hands it’s less likely to break hitting the soft towel rather than the hard sink. And while out of your mouth, be sure you store your appliance out of reach of small children and pets to avoid the chance of damage.
Cleaning and caring for your appliance reduces the risk of disease that might affect your gums or other natural teeth. It will also help keep your appliance working as it was designed for some time to come.